“Can you put Jibbitz in lined crocs?” Yes, you can put Jibbitz in lined crocs. This question has been one of the recent popular questions that most people seek to find answers to.
The fur-lined Crocs is the upgraded design of the existing orthodox Crocs that most people are familiar with. It is only natural that this should stir up curiosity in the mind of users regarding the compatibility of Jibbitz and the fur-lined Crocs.
This is because, unlike the popular Crocs, the fur-lined iteration seems to seal the holes through which the other edge of the Jibbitz sits. But then, this is not the case.
How can you put Jibbitz in lined Crocs?
Table of Contents
The way you put Jibbitz in lined Crocs is by snapping the Jibbitz head through the holes and pushing it in from the outside. You do so while making a sort of twist from side to side, and then inserting into your Crocs holes.
It would snap inside in less than six seconds. While you may think that it is far different from the way you put Jibbitz in normal Crocs, it is almost the same way.
The only difference is that you can’t pull the Jibbitz half protruding head from the inside to have it all in as the fur would stand as a barrier.
It would have been difficult if the fur was glued to the walls of the Croc. However, this is not the case.
Even if that were the case, it still would have been possible as one can easily drill a hole through the fur line, then lodge the Jibbitz through and have them sit well.
Jibbitz is a big thing to many Crocs lovers and they would always find a way of merging this Jibbitz to their favorite Crocs design.
The end of the Jibbitz that passes through the Crocs’ hole is elastic and flat. This way, it is easily squeezable due to the elasticity of the type of polymeric material property.
When it passes through the hole, it lays flat inside, with its flat head extending wider than the circumference of the hole therein.
This makes it difficult to easily slip out. Except if twisted from the inside, or pulled forcefully through the outer head, but there will hardly ever be a need for that.
Hence, the Jibbitz stays perfectly in place until several months or years, depending on the manner of, or constancy of use, then it begins to fade and lose grip just like every other shoe would answer to the call of time.
What about LiteRide Crocs? Can you put Jibbitz in on them?
Yes, you can put Jibbitz on LiteRide Crocs, but this is not as easily possible as with the case with the orthodox Crocs or the fur-lined Crocs. LiteRide Crocs have several holes in them.
But the number of these holes is five times as many as the holes in the early version Crocs and the fur-lined Crocs. An average of 250 holes per one of a pair of Crocs.
This simply means, for such an amount of holes to exist on one of a Croc pair, then the sizes of these holes are definitely smaller than that of the holes of an average regular Croc type.
And this is where the problem lies. How does one fix Jibbitz into this ridiculously small hole on the LiteRide Crocs? Same Jibbitz that need to be squeezed before it enters into the hole of an average Croc hole that is even relatively bigger.
Impossible, huh? But you can, and I will show you the easy way to do this.
How do you put Jibbitz in LiteRide Crocs?
There are two ways to put Jibbitz in the LiteRide Crocs. Although one of these ways merely has the Jibbitz sit on the shoe, the other involves a tactical means of infusing the Jibbitz through the tiny LiteRide Crocs holes.
- The use of adhesive
- The use of a long metal plate
1. The use of adhesive
This method was adopted by most people at the introduction of the LiteRide version of Crocs when there was little or no information about a better way of the infusion of Jibbitz through the tiny LiteRide holes.
Although some people still prefer this pattern to date as they are not ready to go through the hurdles of the other way.
This pattern makes use of a kind of adhesive that has a very good adherent property to permit adhesion between the substrates involved in this case (i.e the surface of the LiteRide Crocs and the edge of the Jibbitz).
The flat end of the Jibbitz is usually cut out in this method. And this is done before the adhesion takes place.
2. The use of long a metal plate
While it is true that the holes on the LiteRide Croc have a ridiculous small side, it is also very elastic. But the returning force of the material when stretched is very high too.
This makes it difficult to use bare hands in stretching them to fix the Jibbitz. Hence the adoption of the long and flat metal plate.
The size of this plate quadruples the size of the hole on this Croc type. Nevertheless, the hole is elastic enough to have a good stretchability to accommodate this plate.
When the plate lodges in, it is twisted and rotated while still in the hole to slacken it up. This usually takes up to 2-3 minutes.
After which the Jibbitz is fused through one end of the large opening created by the plate – this fusion happens whilst the plate is still in the hole.
The hole takes a grip of the now infused Jibbitz upon the removal of the plate and stays firmly. This process is repeated for every Jibbitz you fuse in a LiteRide Crocs.
How do you make Jibbitz stay on?
Jibbitz stays and fits nicely when they get infused into the hole of whatever Croc iteration that they are put in.
But on rare occasions, they sometimes pull out during use. Cases as such usually result from having infused Jibbitz with not-too-big flat ends relative to the circumference of the hole of the Crocs that they are lodged into.
To correct this, there are two ways, namely:
- The use of adhesives
- The use of washers
1. The use of adhesives
This method is mostly adopted in cases where the Jibbitz flat head is noticed to be smaller compared to the width of the holes on the Crocs prior to fusing the Jibbitz.
Or, in cases where the Jibbitz comes out of the hole after having been infused. Adhesives are used here to have the Jibbitz glued to the upper of the Croc so firm that it cannot rotate.
However, the downside of using adhesives is that you would cut yourself off the luxury of switching the use of different Jibbitz as these adhesives have strong bonding power.
2. The use of washers
When Jibbitz does not have a good fitting on the Crocs they are put and pulled out, this only results from the Jibbitz flat head not being large enough to hold still. This is solved with the use of washers.
The width of the washer’s hole is smaller than that of the Croc’s hole, but its round edges are larger than the flat head of the Jibbitz.
So, it is simply done by first lodging the Jibbitz through the Crocs’ hole, then from the shoe’s inside, passing it through the washer’s hole.
This way, the washer’s hole is small enough to not allow the Jibbitz to move out easily – also, the washer’s round edge is too large to pass through the Crocs’ hole.
Here are top Jibbitz you should buy online for your lined Crocs
1. Croc Jibbitz 5-pack Trendy Shoe Charms
As long as the use of Jibbitz is involved, compatibility is a big thing. And products of the same brands are often compatible.
And the fact that this Jibbitz is specifically designed by Crocs, and for Crocs shoes, makes it one of the best you would get for your lined Crocs. They sit beautifully on shoes, and their colors are mature.
You can easily tell these apart from that of kids. You should, however, note that this is never to be used as toys for kids as these Jibbitz have choking metal parts if in the mouth of toddlers.
2. Crocs Men’s and Women’s Jibbitz
This is also a type of Jibbitz designed by Crocs and for Crocs shoes. It comes in varieties of designs that allow you to personalize your style.
Unlike other types that easily get worn out and fade in no time when exposed to the sun on a few use, the Croc Unisex Jibbitz is made with quality synthetic materials that have a good measure of durability.
It lodges and sits well. It is one of the few Jibbitz types that are hardly ever removed. A fine blend of true quality and great style.
Related: